RF Adapters and Pigtails

  • SMA 50 Ohm 10 dB PAD (attenuator) – GOLD

    0 out of 5
    • Adds 10 dB of attenuation when signals are too strong.
    • Useful with the preamps for a net 10 dB gain.
    • Works inline with the Airspy or Mini
    $14.95
    Add to cart
    Quick View

  • SMA 50 Ohm Load – GOLD

    0 out of 5
    • Used for directional couplers or other SMA terminations.
    • Gold plated.
    • 50 Ohm.
    $6.95
    Add to cart
    Quick View

  • SMA Angle Adapter (90 degree) – GOLD

    0 out of 5
    • Adapts the RF connection for tight spaces or stress relief.
    • Gold plating matches the Airspy RF connector.
    $6.95
    Add to cart
    Quick View

  • SMA Jack to U.FL Plug Pigtail – 2.2″

    0 out of 5
    • Connects an SMA Male to a U.FL
    • Gold plating matches the Airspy RF and Preamp connectors.
    $9.95
    Add to cart
    Quick View

  • SMA to MCX Adapter – GOLD

    0 out of 5
    • Adapts SMA Male to MCX Male.
    • Gold plated.
    • Used to adapt SMA antennas to RTL dongles.
    $6.95
    Add to cart
    Quick View

  • SMA to MCX GPSDO Pigtail – 12″

    0 out of 5
    • Connects the Airspy R2 clock input to a SMA connector.
    • Used to connect the GPSDO MINI to Airspy Reference input.
    • 12″ in length
    $9.95
    Add to cart
    Quick View

  • SMA to SMA Barrel (Male) – GOLD

    0 out of 5
    • Connects to another SMA Female device, like the 1090 MHz ADS-B Filter/Preamp
    • Gold plating matches the Airspy RF and Preamp connectors.
    $6.95
    Add to cart
    Quick View

  • SMA to SMA Jumper (Male) – 12″

    0 out of 5
    • Connects to another SMA Female device, such as the 1090 MHz ADS-B Filter/Preamp
    • Gold plating matches the Airspy RF and Preamp connectors.
    • RG-316 cable (High Quality / Small Size)
    • Note: Sample pic – may not be identical
    $9.95
    Add to cart
    Quick View

  • SMA to SMA Jumper (Male) – 6″

    0 out of 5
    • Connects to another SMA Female device, such as the 1090 MHz ADS-B Filter/Preamp
    • Gold plating matches the Airspy RF and Preamp connectors.
    • RG-316 cable (High Quality / Small Size)
    • Note: Sample pic – may not be identical
    $9.95
    Add to cart
    Quick View

  • SMA to SMA Pigtail (extension) – 12″

    0 out of 5
    • Adapts the RF connection for tight spaces or stress relief.
    • Gold plating matches the Airspy RF connector.
    • RG-316 cable (High Quality / Small Size)
    $9.95
    Add to cart
    Quick View

  • UHF to BNC Adapter

    0 out of 5
    • Adapts a BNC Female to accept a UHF male connector (PL259).

    While UHF connectors are not our favorite at higher frequencies, we also know there are some who will want UHF adapters, so we will sell these for those who want them (see note below *). These will also work fine for the Spyverter.

    * Due to the wideband nature of the SDR units, use of UHF connectors is highly discouraged if you intend to use the unit above 500 MHz. Why? UHF connectors act like a brick wall to RF signals at higher frequencies, and we want you to get the most out of your SDR receiver.

    $6.95
    Add to cart
    Quick View

  • UHF to SMA Adapter – GOLD & NICKEL

    0 out of 5
    • Adapts the unit to accept a UHF male connector (PL259).

    While UHF connectors are not our favorite at higher frequencies, we also know there are some who will want UHF adapters, so we will sell these for those who want them (see note below *). These will also work fine for the Spyverter.

    * Due to the wideband nature of the SDR units, use of UHF connectors is highly discouraged if you intend to use the unit above 500 MHz. Why? UHF connectors act like a brick wall to RF signals at higher frequencies, and we want you to get the most out of your SDR receiver.

    $6.95
    Add to cart
    Quick View