-
868 MHz / FLARM Filter/Preamp
$52.95NOT SUITABLE FOR HELIUM CRYTOMINING (No TX Bypass)
Uputronics filtered preamps for improved reception on 868 MHz (FLARM/LoRa – Receive ONLY.
This is a cost effective SAW based unit which give excellent performance gains.
All Uputronics preamps are compatible with most USB SDR Dongles such as the Airspy. You can power them from either bias tee (This item is 100% compatible with the Airspy bias-tee) or a simple USB minicable (Purchased separately). Bias tee/USB voltage is 5V max.
This unit is a small filter and preamp designed to go between a software defined radio receiver and an antenna. Using a SAW bandpass filter and a low noise amplifier (LNA), it stops out of band intermodulation while providing additional gain for increased sensitivity. The LNA is before the SAW filter. To block strong commercial FM signals a high pass filter is installed before the LNA.
The LNA used is a MiniCircuits PSA4-5043+ which provides at least 16dB of gain. To stop out of band intermodulation a 868 Mhz SAW bandpass filter, which has a 15MHz bandwidth is also present. The insertion loss of this filter is approximately 2.3dB, which does increase the overall noise figure of the unit to 0.75dB.
The connectors on both input and output are SMA Female. The external power connector is a USB-C and this revision has a power LED.
Datasheets:
https://store.uputronics.com/files/HAB-FPA_Datasheet_Latest.pdfMechanical diagram:
https://store.uputronics.com/files/LNAMechcanicalDiagramV2.pdfQuick View -
ADSB Magnetic Mount Antenna
$8.95- ADSB Magnetic Mount Antenna
- Covers ADSB frequencies (1090 MHz)
- Also works well for 700/800/900 MHz signals
- SMA connector for use with the Airspy.
- Length: 11″
Quick View -
20 %
Remtronix 800 MHz Antenna (BNC)
- The famous 800 MHz antenna
- Minimum +6dB Gain over standard antenna
- Engineered and “Made In Japan”
- Over 20,000 sold through OEM brands
- Covers 700-900 MHz (works pretty well on 450, too)
- BNC connector for general use
- Length: 7″
$24.95$19.95Quick View -
12 %
Remtronix 800 MHz Antenna (Skinny SMA for SDS100 scanner)
- The famous 800 MHz antenna
- Minimum +6dB Gain over standard antenna
- Engineered and “Made In Japan”
- Over 20,000 sold through OEM brands
- Covers 700-900 MHz (works pretty well on 450, too)
- SKINNY SMA connector for use with the Airspy or Uniden SDS100 scanner.
- Length: 7″
$24.95$21.95Quick View -
12 %
Remtronix 800 MHz Antenna (Skinny SMA for SDS100 scanner) – Water Resistant
- The famous 800 MHz antenna
- Minimum +6dB Gain over standard antenna
- Engineered and “Made In Japan”
- Over 20,000 sold through OEM brands
- Covers 700-900 MHz (works pretty well on 450, too)
- SKINNY SMA connector for use with the Airspy or Uniden SDS100 scanner.
- Length: 7″
- o-ring to resist water penetration
$24.95$21.95Quick View -
20 %
Remtronix 800 MHz Antenna (SMA)
- The famous 800 MHz antenna
- Minimum +6dB Gain over standard antenna
- Engineered and “Made In Japan”
- Over 20,000 sold through OEM brands
- Covers 700-900 MHz (works pretty well on 450, too)
- SMA connector for use with the Airspy.
- Length: 7″
$24.95$19.95Quick View -
7 %
Remtronix REM-830 800 MHz ANGLE Antenna (BNC)
- The famous 800 MHz antenna
- Minimum +6dB Gain over standard antenna
- Engineered and “Made In Japan”
- Over 20,000 sold through OEM brands
- Covers 700-900 MHz (works pretty well on 450, too)
- BNC connector for general use
- Length: 7″
- ANGLE connector – perfect for base scanners
$29.95$27.95Quick View -
Telescopic antenna
$8.95- General purpose telescopic antenna
- Factory spec coverage 144/430 MHz.
- Tested to cover 136-960 MHz.
- May cover outside those bands as well.
- Swivel base is ideal for the Airspy.
- SMA connector for use with the Airspy.
Quick View
Product Tag - 800
