Product Tag - Adapter

  • F to UHF Adapter

    0 out of 5
    • Adapts the feedlines to a UHF Male connector.
    $6.95
  • MCX to SMA Adapter – GOLD

    0 out of 5
    • Adapts MCX Male to SMA Male.
    • Gold plated.
    • Used to adapt RTL antennas to Airspy.
    $6.95
  • N to BNC Adapter

    0 out of 5
    • Adapts a BNC Female to accept an N male connector.
    $6.95
  • N to SMA Adapter – GOLD & NICKEL

    0 out of 5
    • Adapts the unit to accept an N male connector.
    • Note: Sample pic – may not be identical
    $6.95
  • N to SMA Pigtail – 12″

    0 out of 5
    • Adapts the unit to accept an N male connector.
    • This 12″ cable (pigtail) reduces stress on the unit when using heavy duty feedlines.
    • RG-316 cable (High Quality / Small Size)
    $9.95
  • SMA 50 Ohm 10 dB PAD (attenuator) – GOLD

    0 out of 5
    • Adds 10 dB of attenuation when signals are too strong.
    • Useful with the preamps for a net 10 dB gain.
    • Works inline with the Airspy or Mini
    $14.95
  • SMA 50 Ohm Load – GOLD

    0 out of 5
    • Used for directional couplers or other SMA terminations.
    • Gold plated.
    • 50 Ohm.
    $6.95
  • SMA Angle Adapter (90 degree) – GOLD

    0 out of 5
    • Adapts the RF connection for tight spaces or stress relief.
    • Gold plating matches the Airspy RF connector.
    $6.95
  • SMA to MCX Adapter – GOLD

    0 out of 5
    • Adapts SMA Male to MCX Male.
    • Gold plated.
    • Used to adapt SMA antennas to RTL dongles.
    $6.95
  • SMA to SMA Barrel (Male) – GOLD

    0 out of 5
    • Connects to another SMA Female device, like the 1090 MHz ADS-B Filter/Preamp
    • Gold plating matches the Airspy RF and Preamp connectors.
    $6.95
  • UHF to BNC Adapter

    0 out of 5
    • Adapts a BNC Female to accept a UHF male connector (PL259).

    While UHF connectors are not our favorite at higher frequencies, we also know there are some who will want UHF adapters, so we will sell these for those who want them (see note below *). These will also work fine for the Spyverter.

    * Due to the wideband nature of the SDR units, use of UHF connectors is highly discouraged if you intend to use the unit above 500 MHz. Why? UHF connectors act like a brick wall to RF signals at higher frequencies, and we want you to get the most out of your SDR receiver.

    $6.95
  • UHF to SMA Adapter – GOLD & NICKEL

    0 out of 5
    • Adapts the unit to accept a UHF male connector (PL259).

    While UHF connectors are not our favorite at higher frequencies, we also know there are some who will want UHF adapters, so we will sell these for those who want them (see note below *). These will also work fine for the Spyverter.

    * Due to the wideband nature of the SDR units, use of UHF connectors is highly discouraged if you intend to use the unit above 500 MHz. Why? UHF connectors act like a brick wall to RF signals at higher frequencies, and we want you to get the most out of your SDR receiver.

    $6.95