Spyverter R2x (External Reference input)
Raspberry Pi GPS/RTC Expansion Board $49.95
Remtronix 800 MHz Antenna (Skinny SMA for SDS100 scanner) – Water Resistant $24.95 $21.95
14 %
A-Spyverter R2x

Spyverter R2x (External Reference input)

Be the first to review

$74.00 $64.00

  • NOW available with external frequency reference input
  • GPSDO reference clock input (SMA) INCLUDED
  • Adapts Airspy to cover 1 kHz to 60 MHz.
  • New R2 version with 80% current draw reduction.
  • 10 MHz instantaneous spectral view.
  • This is NOT “just another upconverter”.
  • The ideal expansion option for your Airspy.
  • Includes two barrel connectors + jumper.
  • No external power required (when powered by an Airspy)
  • NOTE: NO Micro USB power cable is supplied with this package. See below for USB cables when used with non-Airspy/Bias-T SDRs.

See https://airspy.com/spyverter-r2/ for specs.

SKU: A-Spyverter-R2x Categories: , Tags: , , , , , ,
  • Description
  • Reviews (0)
  • Warranty Info

Description

ul class=”list”>

  • NOW available with external frequency reference input
  • GPSDO reference clock input (SMA) INCLUDED
  • Adapts Airspy to cover 1 kHz to 60 MHz.
  • New R2 version with 80% current draw reduction.
  • 10 MHz instantaneous spectral view.
  • This is NOT “just another upconverter”.
  • The ideal expansion option for your Airspy.
  • Includes two barrel connectors + jumper.
  • No external power required (when powered by an Airspy)
  • NOTE: NO Micro USB power cable is supplied with this package. See below for USB cables when used with non-Airspy/Bias-T SDRs.

    • See https://airspy.com/spyverter-r2/ for specs.

    Reviews

    There are no reviews yet.

    Be the first to review “Spyverter R2x (External Reference input)”

    Airspy Warranty

    Airspy warranty is limited to 1 year from the date of delivery for purchased units that fail under normal operating conditions. Airspy units will be repaired at a price of $50.00 plus $10.00 shipping/handling. Normal operating conditions do not include excessive mechanical stresses due to mishandling, dropping, or bending; mechanical or electrical modifications; Electro-Static Discharge (ESD); excessive RF signals; excessive thermal stresses due to improper ventilation or cooling, submersion in any fluid; and any unauthorized repairs.
    All warranty claims will be determined by Airspy or their representatives.

    Accessory Warranty (except Filter/preamp)

    Accessory warranty (except Filter/Preamp) is limited to 90 days from the date of delivery for accessories that fail under normal operating conditions. The warranty is limited to electrical failiure. Physical damage is specifically excluded unless such damage arises from normal use. Antennas are generally considered ‘disposable items’, although very limited warranties may be honored. All warranty cases will be determined by Airspy.US for these items. Contact us for any warranty claims.

    You may also like…

    Related Products

    • USB-C-to-USB-C Cable for Filter/Preamps (newer style)

      0 out of 5
      • USB cable for the Filter/Preamps and Preamps that have a USB-C connector on BOTH ends.
      • For use when Bias-T is not available (when Airspy is not used)
      • NOTE: Color may vary
      • NOTE: NOT compatible with Airspy (use OEM cable)
      $4.95
      Add to cart
      Quick View
    • 17 %

      Airspy Mini SDR

      3.67 out of 5

       

      • Airspy Mini
      • Same specs as Airspy but 6 MHz view
      • Lower CPU requirements than Airspy
      • The antenna connector is a Female SMA.

      See https://airspy.com/airspy-mini/ for specs.

      $119.00 $99.00
      Add to cart
      Quick View
    • 7 %

      z(DISCONTINUED) LeoNTP (Network Time clock) Rack Mount (Triple)

      0 out of 5
      • True Stratum 1 NTP Compatible
        Master Clock / Time Server.
      • Can serve tens of thousands of clients.
      • Very cost effective
      • Supports NTP/SNTP
      • Front OLED Display for time display and configuration
      • Rack Mount with single LeoNTP
      • Note: This is a SPECIAL ORDER item not usually stocked
      $1,399.00 $1,299.00
      Read more
      Quick View

    • 915 MHz Filter/Preamp with TX BYPASS

      5.00 out of 5

      This preamp IS suitable for helium cryptomining (it has a TX Bypass)

       

      Uputronics filtered preamps for improved reception on 915Mhz WITH TX BYPASS.

       

      This unit is a filtered preamp designed to go between a radio transceiver and an antenna which gives excellent performance gains for reception and bypasses the preamplification circuit when a transmission is detected.

       

      Power is either via bias tee or a USB-C cable (Not Supplied – See related items for a suitable USB Type A to C Cable). Bias-tee voltage input is 5V.

       

      Using a SAW bandpass filter and a low noise amplifier (LNA), it stops out of band intermodulation while providing additional gain for increased sensitivity. The LNA is before the SAW filter. These particular models are tuned for use with frequencies centred on 915MHz (893MHz-935MHz). The LNA provides around 15dB of gain at 915MHz.

       

      SMA female connectors are fitted for antenna input and radio output, a blue power indicator is provided which switches to red to indicate the unit is bypass mode. The external power connector is a USB-C.

       

      Max TX power +15dBm (30mW)
      TX detection threshold -5dBm (+/-2dBm)

       

      Data Sheet Here : https://store.uputronics.com/files/FPA-TXB-V6.03.pdf

      Datasheets:
      https://store.uputronics.com/files/HAB-FPA_Datasheet_Latest.pdf



      Mechanical diagram:
      https://store.uputronics.com/files/LNAMechcanicalDiagramV2.pdf

      $99.95
      Add to cart
      Quick View

    • BNC to SMA Adapter – SDS100 – SILVER (Nickel)

      0 out of 5
      • Specifically made to fit the Uniden SDS100 scanner
      • BEWARE of similar looking adapters! The common look-alikes WILL NOT be reliable IF they work at all!
      • Adapts the Scanner to accept a BNC male connector.
      • Heavy duty adapter will not break like two-piece adapters.
      • Silver in color
      $14.95
      Add to cart
      Quick View

    • Raspberry Pi GPS/RTC Expansion Board

      0 out of 5

      NEW FOR 2020 Now with RAW Output & Hardware RTC

       

      The Uputronics Raspberry Pi GPS/RTC Expansion Board provides a modern multi GNSS GPS receiver and hardware RTC with quick no soldering required connection to all Raspberry Pi boards with the 2×20 header (the original Pi Model A/B are not supported). Featuring PPS (Pulse per second) output to permit the use of the board for PPS disciplined NTP servers, RAW output available from the UBlox™ GPS module and twin super caps for GPS hot start/setting retention & maintaining RTC.

       

      This board retains backwards compatibility with previous generation Uputronics Pi GPS boards. With its features and ease of installation we believe this is the ultimate GPS /  RTC HAT for the Raspberry Pi.

       

      GPS Specifications:

      • 72-channel u-blox™ M8 engine
      • Up to 3 concurrent GNSS (BeiDou,Galileo,GLONASS,GPS/QZSS)
      • Default GNSS: GPS/GLONASS.
      • -167dBm Navigation Sensitivity
      • 10Hz navigation rate in multiGNSS mode, 18Hz in GPS only
      • RAW Output available via UBX-RXM-RAWX Message
      • 3V supplied to antenna port to power active antenna
      • Antenna requirements: Active 3V Ceramic Patch
      • No EEPROM settings must be sent at power up or saved to battery backed RAM.
      • Default baud rate: 9600bps
      • I2C Bus (Address 0x42)
      • Robust SMA antenna connection.

       

      For full documentation please consult the u-blox 8/u-blox M8 receiver description including protocol specification document (UBX-13003221) linked here: https://store.uputronics.com/files/UBX-13003221.pdf

       

      RTC Specifications:

      • Micro Crystal RV-3028-C7 Real Time Clock Module
      • Factory calibrated ±1 ppm @ 25°C
      • I2C Bus (Address 0x52)
      • Built in kernel compatibility
      • Provides year, month, date, weekday, hours, minutes and seconds

       

      In The Box

      1 x Raspberry Pi GPS/RTC Expansion Board
      4 x 11mm standoffs w/8 M2.5 Screws
      1 x Header with 4.93mm tails

       
      Full Data Sheet Here : https://store.uputronics.com/files/Uputronics%20Raspberry%20Pi%20GPS%20RTC%20Board%20Datasheet.pdf

      $49.95
      Add to cart
      Quick View
    • 7 %

      z(DISCONTINUED) LeoNTP (Network Time clock) Rack Mount (Single)

      0 out of 5
      • True Stratum 1 NTP Compatible
        Master Clock / Time Server.
      • Can serve tens of thousands of clients.
      • Very cost effective
      • Supports NTP/SNTP
      • Front OLED Display for time display and configuration
      • Rack Mount with single LeoNTP
      $449.00 $419.00
      Read more
      Quick View
    • 17 %

      Spyverter R2

      0 out of 5

       

      • Adapts Airspy to cover 1 kHz to 60 MHz.
      • New R2 version with 80% current draw reduction.
      • GPSDO reference clock input (on board *).
      • 10 MHz instantaneous spectral view.
      • This is NOT “just another upconverter”.
      • The ideal expansion option for your Airspy.
      • Includes two barrel connectors + jumper.
      • No external power required (when powered by an Airspy)
      • NOTE: NO Micro USB power cable is supplied with this package. See below for USB cables when used with non-Airspy/Bias-T SDRs.
      • * External option available. See https://v3.airspy.us/product/spyverter-r2x/

      See https://airspy.com/spyverter-r2/ for specs.

      $59.00 $49.00
      Add to cart
      Quick View

    • LeoNTP 1200 (Network Time clock)

      0 out of 5

      LeoNTP Time Server 1200 is a Stratum 1 Master Clock / Time server with GPS synchronised clock source designed from the ground up with the sole purpose of providing a cost effective but highly accurate and extremely high performing networked time server. Extremely easy to setup and configurable with flexible power options USB/PoE (802.3af) it can provide accurate synchronised time for your LAN, WAN, CCTV, PLC, Telephone systems or anywhere accurate standalone time is required.

      Optional 1U rackmount for mounting one,two or three units (Rack mount kit comes with shelf, screws and 2 blanks. Each kit can take one, two or three LeoNTP 1200 units)

      Optional DIN Rail Mounting Kit

      Unit can sustain 100Mbps (> 100,000 NTP Packets a second)

      Traditional Master Clocks either have high performance or low cost. With LeoNTP Time Server 1200 you can have both in the same package.

      Key Features

      • True Stratum 1 NTP Compatible Master Clock / Time Server.
      • Can serve tens of thousands of clients.
      • Very cost effective
      • Supports NTP/SNTP
      • Front TFT Display for time display and configuration




      Network:
      10/100Mb RJ45 Autosensing
      IPV4 DHCP/Static IP
      IPV6 SLAAC/Static (DHCPv6 not supported)

      Time:
      NTP V2, V3, V4, SNTP V3, V4

      NTP Requests/sec:
      >100K (Wire speed) per unit.
      > 1million concurrent clients typical

      GPS:
      72 Channel
      -167dBm Sensitivity
      Power for active antenna supplied via bias tee.

      Power:
      USB/ 48V PoE 802.3af

      Timing Performance:
      GPS Accuracy:
      30ns RMS, 60ns 99%
      Cold Start acquisition < 30s

      NTP Accuracy:
      < 1µS Hold over on loss of GPS signal Typically 1-4ms in 24 hours Reverts to Stratum 16 after 24 hours with no GPS

      Mechanical Dimension:
      140mm x 170mm x 45mm

      BNC Output:
      PPS/1Mhz/10Mhz Accuracy 30ns RMS, 60ns 99%

      Warranty:
      1 year RTB
      Lifetime Firmware updates and support.

      In The Box :
      1 x LeoNTP Time Server 1200 Device
      1 x GPS Puck Antenna with 3 meter cable
      1 x USB Cable
      1 x 2 meter RJ45 Patch Cable

      See associated items for external timing antenna and BNC to MCX cables.

      Documents:
      LeoNTP 1200 Time Server Manual


      Latest Firmware


      Frequently Asked Questions:

      Q/ Is this unit based on Linux and NTP ?
      A/ No the hardware and code running it are completely propriety and don’t use any source code from Linux or NTP. This is done to ensure maximum performance with no overheads and security issues.


      Q/ Can I configure it via HTTP/Telnet ?
      A/ No. Running a web server on this device although entirely possible would reduce the performance of the unit. Therefore we took the decision to just do configuration via the front panel.


      Q/ The performance figures look too good to be true at the price
      A/ The performance figures are the result of a focused determination to get the best performance out of the hardware. By not using off the shelf hardware and software we have no overheads or compromises. Try it yourself using Miroslav Lichvar's ntpperf tool.


      It only starts to drop when the 100Mb interface is maxed out:



      nevis@test:~/ntpperf$ sudo ./ntpperf -i enp5s0 -m 70:B3:D5:E3:D0:04 -d 172.16.1.72 -s 172.16.1.0/16 -B
      | responses | TX timestamp offset (ns)
      rate clients | lost invalid basic xleave | min mean max rms
      1000 100 0.00% 0.00% 100.00% 0.00%
      1500 150 0.00% 0.00% 100.00% 0.00%
      2250 225 0.00% 0.00% 100.00% 0.00%
      3375 337 0.00% 0.00% 100.00% 0.00%
      5062 506 0.00% 0.00% 100.00% 0.00%
      7593 759 0.00% 0.00% 100.00% 0.00%
      11389 1138 0.00% 0.00% 100.00% 0.00%
      17083 1708 0.00% 0.00% 100.00% 0.00%
      25624 2562 0.00% 0.00% 100.00% 0.00%
      38436 3843 0.00% 0.00% 100.00% 0.00%
      57654 5765 0.00% 0.00% 100.00% 0.00%
      86481 8648 0.00% 0.00% 100.00% 0.00%
      129721 12972 15.49% 0.00% 84.51% 0.00% <- 100Mb Interface Saturated 194581 16384 43.65% 0.00% 56.35% 0.00% 291871 16384 62.43% 0.00% 37.57% 0.00%

      Q/ Can the unit be firmware updated?
      A/ Yes via USB into a Windows PC or Mac. Updates take about 5 seconds to apply.


      Q/ Is the BNC output compatible with the Airspy
      A/ Yes. Set the BNC output to 10Mhz. Connect the unit to your Airspy via the optional BNC to MCX cable and power the Airspy on.


      Q/ Can the unit display my local time ?
      A/ Yes. Press the button on the clock screen and use the knob to select your time zone.


      Q/ Whats the maximum length of coax to the antenna ?
      A/ This depends on the antenna and coax. We've tested our timing antenna (comes with 10 meters of coax) with a 20 meter extension and it works fine. The unit is POE so it may be easier to run a network cable closer to the antenna and install the unit there.


      Q/ Does the unit support IPv6
      A/ Not currently its in the pipeline and will be available to all units on release via firmware update.


      Q/ What happens on loss of GPS Signal
      A/ The unit enters failover mode which uses internal compensation to maintain the accuracy of the timing to 1-4ms typically over 24 hours. After 24 hours with no GPS signal the unit reverts to being a Stratum 16 time source.


      Q/ Leap Second Support
      A/ The unit has leap second support and a count down timer to the next leap second insertion.

      $650.00
      Add to cart
      Quick View