Airspy HF+ (Dual Port) SDR
Airspy HF+ Discovery SDR $199.00 $169.00
Airspy R2 SDR $199.00 $169.00
Airspyhfplus

Airspy HF+ (Dual Port) SDR

$199.00

The Software Defined Radio revolution brought great flexibility in VHF and UHF reception. Today we offer the best wide band receivers which address these needs. We also provide a high performance extension for weak-signal wide band reception on HF – something other competing solutions fail to address efficiently.
Airspy HF+ is a paradigm shift in high performance HF radio design. It is a joint effort between Airspy, Itead Studio and a top-tier semiconductor company to build a state of the art SDR for HF and VHF bands.
Like most high-end HF receivers, the HF+ uses very high dynamic range ADC’s and front-ends. But unlike the current offerings in the market, it also brings more frequency agility by using high performance passive mixers with an excellent polyphase harmonic rejection structure. No external band aid filters are required like the lower end HF receivers, which makes it the ideal companion for light portable high performance operation.
Both the architecture and level of integration achieved in this design allow us to bring top performance reception at a very affordable price.

Featured specifications:

  • State of the art SDR for HF and VHF
  • Covers 9 kHz to 31 MHz plus 60 to 260 MHz
  • 660 kHz Alias and Image-free output
  • 18 bit DDC
  • 0.5 ppm high precision, low noise clock
  • No drivers required! (plug-and-play)
  • Best Noise Reduction on the market!
  • Supported by SDR# – the gold standard program! (and other SW)
  • Full details at https://airspy.com/airspy-hf-plus/

 

Hardware specifications:

  • The antenna connectors are Female SMA.
  • The USB connector is a Micro USB.
  • Comes as shown with Airspy HF+ SDR Receiver and USB cable.

Out of stock

SKU: A-Airspy-HFPlus Category: Tags: , , , , , ,
  • Description
  • Warranty Info

Description

Technical Specifications:

  • HF coverage between 9 kHz .. 31 MHz
  • VHF coverage between 60 .. 260 MHz
  • -140.0 dBm (0.02 µV / 50 ohms at 15MHz) MDS Typ. at 500Hz bandwidth in HF
  • -141.5 dBm MDS Typ. at 500 Hz bandwidth in FM Broadcast Band (60 – 108 MHz)
  • -142.5 dBm MDS Typ. at 500 Hz bandwidth in VHF Aviation Band (118 – 136 MHz)
  • -140.5 dBm MDS Typ. at 500 Hz bandwidth in VHF Commercial Band (136 – 174 MHz)
  • -140.0 dBm MDS Typ. at 500 Hz bandwidth in the upper VHF Band (> 174 MHz)
  • +15 dBm IIP3 on HF at maximum gain
  • +13 dBm IIP3 on VHF at maximum gain
  • 110 dB blocking dynamic range (BDR) in HF
  • 95 dB blocking dynamic range (BDR) in VHF
  • 150+ dB combined selectivity (hardware + software)
  • 120 dB Image Rejection (software)
  • Up to 660 kHz alias and image free output for 768 ksps IQ
  • 18 bit Embedded Digital Down Converter (DDC)
  • 22 bit! Resolution at 3 kHz channel using State of the Art DDC (SDR# and SDR-Console)
  • +10 dBm Maximum RF input
  • 0.5 ppm high precision, low phase noise clock
  • 1 PPB! frequency adjustment capability
  • Very low phase noise PLL (-110 dBc/Hz @ 1kHz separation @ 100 MHz)
  • Best Noise reduction of the market using state of the art algorithms
  • 2 x High Dynamic Range Sigma Delta ADCs @ up to 36 MSPS
  • No Silicon RF switch to introduce IMD in the HF path
  • Routable RF inputs with simple modification
  • Wide Band RF filter bank
  • Tracking RF filters
  • Sharp IF filters with 0.1 dB ripple
  • Smart AGC with real time optimization of the gain distribution
  • All RF inputs are matched to 50 ohms
  • 4 x Programmable GPIO’s
  • No drivers required! 100% Plug-and-play on Windows Vista, Seven, 8, 8.1 and 10
  • Industrial Operating Temperature: -45°C to 85°C
  • Full details at https://airspy.com/airspy-hf-plus/

Airspy Warranty

Airspy warranty is limited to 1 year from the date of delivery for purchased units that fail under normal operating conditions. Airspy units will be repaired at a price of $50.00 plus $10.00 shipping/handling. Normal operating conditions do not include excessive mechanical stresses due to mishandling, dropping, or bending; mechanical or electrical modifications; Electro-Static Discharge (ESD); excessive RF signals; excessive thermal stresses due to improper ventilation or cooling, submersion in any fluid; and any unauthorized repairs.
All warranty claims will be determined by Airspy or their representatives.

Accessory Warranty (except Filter/preamp)

Accessory warranty (except Filter/Preamp) is limited to 90 days from the date of delivery for accessories that fail under normal operating conditions. The warranty is limited to electrical failiure. Physical damage is specifically excluded unless such damage arises from normal use. Antennas are generally considered ‘disposable items’, although very limited warranties may be honored. All warranty cases will be determined by Airspy.US for these items. Contact us for any warranty claims.

You may also like…

Related Products

  • z(DISCONTINUED) 220 MHz Filter/Preamp

    0 out of 5

    Uputronics filtered preamps for improved reception on 220Mhz.

    This is a cost effective SAW based unit which give excellent performance gains.

    All Uputronics preamps are compatible with most USB SDR Dongles such as the Airspy. You can power them from either bias tee (This item is 100% compatible with the Airspy bias-tee) or a simple USB mini cable (Purchased separately). Bias tee/USB voltage is 5V max.

    This unit is a small filter and preamp designed to go between a software defined radio receiver and an antenna. Using a SAW bandpass filter and a low noise amplifier (LNA), it stops out of band intermodulation while providing additional gain for increased sensitivity. The LNA is before the SAW filter. To block strong commercial FM signals a high pass filter is installed before the LNA.

    The LNA used is a MiniCircuits PSA4-5043+ which provides at least 20dB of gain. To stop out of band intermodulation a 220Mhz SAW bandpass filter, which has a 7MHz bandwidth is also present. The insertion loss of this filter is approximately 2.3dB, which does increase the overall noise figure of the unit to 0.75dB. Connectors are SMA female both sides.

    $52.95
    Read more
    Quick View
  • 17 %

    Spyverter R2

    0 out of 5

     

    • Adapts Airspy to cover 1 kHz to 60 MHz.
    • New R2 version with 80% current draw reduction.
    • GPSDO reference clock input (on board *).
    • 10 MHz instantaneous spectral view.
    • This is NOT “just another upconverter”.
    • The ideal expansion option for your Airspy.
    • Includes two barrel connectors + jumper.
    • No external power required (when powered by an Airspy)
    • NOTE: NO Micro USB power cable is supplied with this package. See below for USB cables when used with non-Airspy/Bias-T SDRs.
    • * External option available. See https://v3.airspy.us/product/spyverter-r2x/

    See https://airspy.com/spyverter-r2/ for specs.

    $59.00 $49.00
    Add to cart
    Quick View

  • 162 MHz Filter/Preamp

    0 out of 5

    Uputronics filtered preamps for improved reception on 159-163 Mhz.

    This is a cost effective SAW based unit which give excellent performance gains.

    All Uputronics preamps are compatible with most USB SDR Dongles such as the Airspy. You can power them from either bias tee (This item is 100% compatible with the Airspy bias-tee) or a simple USB minicable (Purchased separately). Bias tee/USB voltage is 5V max.

    This unit is a small filter and preamp designed to go between a software defined radio receiver and an antenna. Using a SAW bandpass filter and a low noise amplifier (LNA), it stops out of band intermodulation while providing additional gain for increased sensitivity. The LNA is before the SAW filter. To block strong commercial FM signals a high pass filter is installed before the LNA.

    The LNA used is a MiniCircuits PSA4-5043+ which provides at least 20dB of gain. To stop out of band intermodulation a 161Mhz SAW bandpass filter, which has a 7.6MHz bandwidth is also present. The insertion loss of this filter is approximately 1.4dB, which does increase the overall noise figure of the unit to 0.75dB

    The connectors on both input and output are SMA Female. The external power connector is a USB-C and this revision has a power LED.

    Datasheets:
    https://store.uputronics.com/files/HAB-FPA_Datasheet_Latest.pdf



    Mechanical diagram:
    https://store.uputronics.com/files/LNAMechcanicalDiagramV2.pdf

    $52.95
    Add to cart
    Quick View

  • 137.5 MHz NOAA/APT Filter/Preamp

    5.00 out of 5

    Uputronics filtered preamps for improved reception on 137.5 Mhz.

    This is a cost effective SAW based unit which give excellent performance gains.

    All Uputronics preamps are compatible with most USB SDR Dongles such as the Airspy. You can power them from either bias tee (This item is 100% compatible with the Airspy bias-tee) or a simple USB mini cable (Purchased separately). Bias tee/USB voltage is 5V max.

    This unit is a small filter and preamp designed to go between a software defined radio receiver and an antenna. Using a SAW bandpass filter and a low noise amplifier (LNA), it stops out of band intermodulation while providing additional gain for increased sensitivity. The LNA is before the SAW filter. To block strong commercial FM signals a high pass filter is installed before the LNA.

    The LNA used is a MiniCircuits PSA4-5043+ which provides at least 21dB of gain. To stop out of band intermodulation an 137.5Mhz SAW bandpass filter, which has a 7.6MHz bandwidth is also present. The insertion loss of this filter is approximately 1.4dB, which does increase the overall noise figure of the unit to 0.75dB. Connectors are SMA female both sides.

    The connectors on both input and output are SMA Female.

    Note: This model still uses a USB Mini connector for external power and has no power LED. It has not received the redesign that the other models have received. We have no ETA for that redesign.

    Datasheets:
    https://store.uputronics.com/files/HAB-FPA_Datasheet_Latest.pdf



    Mechanical diagram:
    https://store.uputronics.com/files/LNAMechcanicalDiagramV2.pdf

    $55.95
    Add to cart
    Quick View
  • 15 %

    Airspy HF+ Discovery SDR

    0 out of 5

    Building on the field-proven Airspy HF+ architecture, we designed the Most Refined HF/VHF SDR with world class performance in the smallest form factor.

     

    The Airspy HF+ Discovery sets a new standard in terms of reception performance with extra pre-selectors for all the supported bands and a New DSP Core to optimize the gain distribution and the filtering parameters in real-time and dig deeper in the noise.

     

    The signal path includes very high dynamic range data converters along with high performance passive mixers with an excellent Polyphase Harmonic Rejection structure. The included band-tracking pre-selectors eliminate unwanted interference and preserve the dynamic range of the receiver. With its world class strong signal handling capability and incredibly Low Noise, the HF+ Discovery is the ideal companion for All your High Performance Receive Scenarios.

     

    Both the architecture and level of integration achieved in this design allow us to bring top performance reception at a very affordable price.
    All the major SDR software is supported. Check the download page.

     

    Ready to discover all these signals hiding in your spectrum?

     

    Featured specifications:

    • State of the art SDR for HF and VHF
    • Covers 0.5 kHz to 31 MHz plus 60 to 260 MHz
    • Up to 660 kHz Alias and Image-free output
    • 18 bit DDC
    • 0.5 ppm high precision, low noise clock
    • No drivers required! (plug-and-play)
    • Best Noise Reduction on the market!
    • Supported by SDR# – the gold standard program! (and other SW)
    • Full details at https://airspy.com/airspy-hf-discovery/

     

    Hardware specifications:

    • The antenna connector is a Female SMA.
    • The USB connector is a Micro USB.
    • Comes with Airspy HF Discovery SDR Receiver and USB cable.
    $199.00 $169.00
    Add to cart
    Quick View
  • 17 %

    Airspy Mini SDR

    3.67 out of 5

     

    • Airspy Mini
    • Same specs as Airspy but 6 MHz view
    • Lower CPU requirements than Airspy
    • The antenna connector is a Female SMA.

    See https://airspy.com/airspy-mini/ for specs.

    $119.00 $99.00
    Add to cart
    Quick View
  • 25 %

    YouLoop HF loop antenna

    5.00 out of 5

     
    Electrically balanced passive loop design with low loss RF transformer to cancel the responses to electric fields.
     
    Ideal for noisy environments where electric-field sensors like the mini-whip antennas are impracticable.
     
    High Performance DX when used with a low noise preamplifier.
     
    High quality 2 meters (approx. 6 feet) transmission line included.
     
     
    Specifications:

    • HF Portable & Flexible Receive Loop Antenna
    • Covers HF frequencies (10 kHz to 30 MHz)
    • Usable on FM/VHF up to 300 MHz as a folded Dipole
    • Maximum power 250 mW
    • Passive Design
    • No Tuning required
    • Low-Loss Wide-Band BALUN with 0.28 dB loss typ.
    • Connection: SMA Male on the end of the feedline.

      •  
      Package contents:

      2 x 1m RG402 18 GHz Coax with SMA Male Connectors – Branches
      1 x 2m RG402 18 GHz Coax with SMA Male Connectors – Transmission Line
      Phase Inverter
      T shaped low-loss wide-band BALUN

     
    Compatibility:

      Airspy HF+ Discovery (Recommended)
      Airspy HF+ Dual Port (with R3 shorted)
      Any other SDR with MDS <= -140 dBm (There aren't that many)
    $39.95 $29.95
    Add to cart
    Quick View
  • 15 %

    Airspy R2 SDR

    4.00 out of 5
    • The antenna connector is a Female SMA.
    • Comes as shown with Airspy R2 SDR Receiver and USB cable.
    • Airspy Revision 2 improves the following:
    • Better USB noise immunity
    • Better ESD protection on the RF input
    • Added ESD protection on the dual High Speed ADC inputs
    • Better RF Shielding
    • Better RF Filtering
    • Replaced the USB connector with a custom designed, more robust, 4 through hole points model
    • Better thermal stability
    • Better compatibility with the SpyVerter

    See https://airspy.com/airspy-r2/ for specs.

    $199.00 $169.00
    Add to cart
    Quick View

  • z(DISCONTINUED) 145 MHz Filter/Preamp

    0 out of 5

    Uputronics filtered preamps for improved reception on 145Mhz.

    This is a cost effective SAW based unit which give excellent performance gains.

    All Uputronics preamps are compatible with most USB SDR Dongles such as the Airspy. You can power them from either bias tee (This item is 100% compatible with the Airspy bias-tee) or a simple USB minicable (Purchased separately). Bias tee/USB voltage is 5V max.

    This unit is a small filter and preamp designed to go between a software defined radio receiver and an antenna. Using a SAW bandpass filter and a low noise amplifier (LNA), it stops out of band intermodulation while providing additional gain for increased sensitivity. The LNA is before the SAW filter. To block strong commercial FM signals a high pass filter is installed before the LNA.

    The LNA used is a MiniCircuits PSA4-5043+ which provides at least 21dB of gain. To stop out of band intermodulation a 145Mhz SAW bandpass filter, which has a 7.6MHz bandwidth is also present. The insertion loss of this filter is approximately 1.4dB, which does increase the overall noise figure of the unit to 0.75dB. Connectors are SMA female both sides.

    $59.95
    Read more
    Quick View

  • Spare USB cable (OEM)

    0 out of 5
    • OEM USB cable – identical to the one shipped with the Airspy.
    • Use as a replacement or spare cable.
    • NOTE: Airspy comes with one of these cables.
    $2.45
    Add to cart
    Quick View